EQUIPMENT
Cubex 5200
The 5200 is a track mounted In-The-Hole drill designed to drill with ITH hammers powered by high air pressure. The drill is equipped with an on-board booster compressor.
The 5200 is a small and versatile electric hydraulic drill designed to effectively drill production blast holes and is capable of drilling Ventilation Raises, Ore and Waste Passes, Production Raises and Service holes. Our 5200 can also offer a shortened drill feed assembly to be used for narrow vein type mining. This mechanically friendly drill allows our operators to keep the rig maintained which minimizes down time.
Cubex Orion
The Orion is a track mounted In-The-Hole drill designed to drill with ITH hammers powered by high pressure air. The drill is equipped with an on-board booster compressor.
The Orion is a step above the 5200. Being equipped with a heavy hoist mast enables this rig to drill bore holes as large as 610mm (24” Canister) or 762mm (30” V-30). The availability of a diesel engine also adds value to this rig for easy mobility.
Stopemaster
The Stopemaster™ HX may be trammed either with the electric hydraulic power pack (plugged into the main AC power supply via the trailing cable), or the onboard diesel engine. Several operating and safety controls must be activated in either mode.
The Stopemasters maneuverability allows this drill to drill holes at any angle. It’s versatility allows operators to efficiently drill production blast holes, Service holes and Ventilation raise’s with minimal maintenance. Our in house mechanical training allows our operators to understand and maintain this rig in the field, minimizing down time.